2025 UL Ordering Catalog - Flipbook - Page 97
DIESEL EXHAUST FLUID FLEXIBLE CONNECTORS
ORDERING INFORMATION
Use these diagrams below along with the Ordering Guide at the bottom of the page to help you build your flexible connector model numbers.
Ordering Options Diagram
Use the options and descriptions in the Ordering Guide along with this diagram to assist in building your model numbers.
B
SERVICE STATION
HARDWARE
A
C
D
End Fitting Options
Use the options and descriptions in the Ordering Guide along with the diagrams below to select your end fitting types (two total).
EZ
EZM
EZF
M
F
BT
BTF
Ordering Guide
DEF A X B C X D
DEF = DEF/AdBlue® Flexible Connector
All materials are fully compatible with DEF/AdBlue® including
stainless steel fittings and EPDM seals
A = Hose Diameter
07 = ¾"
10 = 1"
15 = 1½"
20 = 2"
30 = 3"
Example: DEF20X18MXEZM = DEF flexible connector, 2" hose diameter, 18"
overall length, with one Hex male fixed NPT fitting on one end and one EZ FIT
male NPT fitting on the other (includes EZCLAMP and EZ20GASKET-EPDM).
B = Overall Length in Inches
Use two-digit format
C and D = End Fitting Options
EZ = EZ FIT flange only
EZM = EZ FIT male NPT (Each EZ FIT union style coupling
comes complete with couplers and gaskets)
EZF = EZ FIT female NPT (Each EZ FIT union style coupling
comes complete with couplers and gaskets)
M = Hex male fixed NPT
F = Hex female fixed NPT
BT = Hex male fixed BSPT
BTF = Hex female fixed BSPT
Flexible Connectors with Differing Hose and End Fitting Diameters
All end fittings are, by default, the same diameter as the hose. If you require a flexible connector where the end fitting diameter does
not match the hose diameter, the size must be indicated numerically in front of the corresponding fitting as in the following example.
Example: DEF15X18MX2M = DEF flexible connector, 1½" hose diameter, 18"
overall length, with one 1½" Hex male fixed NPT fitting on one end and one 2"
male NPT fitting on the other.
Diesel Exhaust Fluid Flexible Connectors
Rules:
1) End fitting diameters can not be smaller than hose diameters.
2) Only one hose fitting per flexible connector can be of a different diameter than
the hose diameter.
3) End fitting diameter must only be one size larger than hose (1" hose could use
1½" fitting, 1½" hose could use 2" fitting, etc.)
97
