2025 UL Ordering Catalog - Flipbook - Page 232
MULTIPLEXING SENSOR HUB™
ORDERING INFORMATION
Model
Description
FMP-MSH
Multiplexing Sensor Hub™
SPECIFICATIONS
Inputs
Output
(1) LL3 probe, (4) UDP devices, (1) switch/
temperature sensor, (1) RS-485 sensor
Input Capabilities
The FMP-MSH is capable of supporting the following devices:
EVO™ 600/6000: (1) RS-485
Channel 1
Channel
2
Channel
3
Channel
4
Channel
5
Channel
6
FMP-LL3
FMP-DDS-U
FMP-DDS-U
FMP-DDS-U
FMP-DDS-U
FMP-ULS
– Power
FMP-DTS-U
FMP-DTS-U
FMP-DTS-U
FMP-DTS-U
FMP-UHS
– Ground
FMP-EIS-U
FMP-EIS-U
FMP-EIS-U
FMP-EIS-U
FMP-HFS2
– A Communication
FMP-DIS-U
FMP-DIS-U
FMP-DIS-U
FMP-DIS-U
10k Temp.
Sensor
– The FMP-MSH requires a minimum of four wire
connections to the EVOTM RS-485 Module:
– B Communication
Theory of
Operation
– If a sump has at least two existing input field
cables, such as a 2-conductor probe cable and a
2-conductor sensor cable, conductors from both
cables may be used to provide the four conductors
required for the MSH to EVOTM connection.
– The A and B conductors must be wired together in
a shielded, twisted cable; and the Power and
Ground conductors must be within the same
shielded, twisted cable.
FMP-HIS-U
FMP-HIS-U
FMP-HIS-U
FMP-HIS-U
FMP-CDS-U
FMP-CDS-U
FMP-CDS-U
FMP-CDS-U
FMP-DPS-U
FMP-DPS-U
FMP-DPS-U
FMP-DPS-U
FMP-LL3-XX-WS* FMP-LL3-XX-WS* FMP-LL3-XX-WS* FMP-LL3-XX-WS*
FMP-ULS
FMP-UHS
*The FMP-LL3-XX-WS is integrated into the Corrosion Control™ water separator to
detect water level in the vessel.
– If there is not sufficient existing wiring,
Belden Cable 7962A may be used.
Approvals &
Certifications
232
UL listed, ATEX / IECEx
Multiplexing Sensor Hub™
