2025 UL Ordering Catalog - Flipbook - Page 13
ORDERING INFORMATION CONTINUED
2 Hp Fixed Speed Submersible Pump Ordering Guide
A typical model designation has up to five components to define
the pump being supplied as follows:
Model Length (A)
Model Length
Range
59" – 87"
VL1
2 Hp Variable Speed
90" – 151"
VL2
122" – 213"
VL3
STP XXXXX Y - A - B
STP = Basic Model Designation
XXXXX = Factory Installed Options
Model designations may include one or more of the
following characters:
AP = Advanced Protection with powder-coated, e-coated, and
stainless steel components, alcohol-gasoline compatible (up to
E85, up to B20, and B100) (Note standard models up to 10%
ethanol capable)
2 Hp Fixed Speed
2 Hp Fixed Speed
High Pressure
Model Length
Designation
63" – 92"
VL1
94" – 154"
VL2
126" – 218"
VL3
63" – 92"
VL1
94" – 155"
VL2
126" – 218"
VL3
SUBMERSIBLE
PUMPING SYSTEMS
STP Horsepower
AG = Alcohol-gasoline compatible (up to E85, up to B20, and
B100) (Note standard models up to 10% ethanol capable)
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell® (flow enhancing, expanded PMA shell)
*R = Model R check valve (24 psi relief / 22 psi reset for PLLD)
Y = Pump Motor Horsepower Rating
200 = 2 Hp fixed speed
(B)
RISER
LENGTH
A = Model Length (see table)
VL1 = Variable length range #1
VL2 = Variable length range #2
VL3 = Variable length range #3
(Note VL2 models fit 94% of all known installations)
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that
indicate the total length of the riser in inches. Riser pipes are
available from 7" to 60" in 1" increments (additional charge for
risers 31" or longer).
(A)
MODEL
LENGTH
*If not otherwise specified, all STP models are supplied with standard model check
valve (40 psi relief / 35 psi reset for MLD, TS-LS300, and TS-LS500).
2 Hp Submersible Turbine Pumps
13
