2025 UL Ordering Catalog - Flipbook - Page 124
SPECIFICATIONS CONTINUED
Primary Layer Construction
Nylon 12 (fuel line material contains no polyethylene)
Approvals & Certifications
UL971 listed
UL971 listed for fuels including:
– Motor vehicle fuels typically found in consumer dispensing facilities like gasoline or diesel including
blended fuels with maximum 15% MTBE, 15% Methanol or 30% Ethanol.
Fuel Compatibility
– Concentrated fuels such as alternate unblended fuels containing up to 100% concentrations of
Toluene, Methanol or Ethanol.
– High blend fuels with higher than normal gasoline blends with maximum 50% Methanol or 50%
Ethanol.
– Aviation and marine specialty fuels containing up to 100% kerosene or leaded gasoline.
Ethanol Blends Compatibility
High-blend ethanol, with ethanol/gasoline blends between 51% - 83% (E51 - E83) - commercially known
as “E-85”
– Biodiesel up to 5% (B5)
Biodiesel Compatibility
– Biodiesel up to 20% (B20)
– Biodiesel at 97% - 100% (B99 / B100)
– All ASTM defined biofuel blends
Pipe Dimensions
Pipe
ID ± 0.010
Primary Layer
OD ± 0.020
Primary Layer
OD ± 0.030
SC Jacket
OD ± 0.030
Scuff Guard
Minimum Bend
Radius
1½" Secondary Contained
1.40"
1.70"
1.90"
1.925"
36"
1¾" Secondary Contained
1.65"
1.95"
2.15"
2.175"
36"
2" Secondary Contained
2.04"
2.45"
2.65"
2.675"
36"
2" Single Wall
2.04"
2.45"
--
--
36"
Reel Dimensions
Master Reel
91" × 33" × 74" (231.1cm × 83.8cm × 187.9cm)
Super Master Reel
91" × 52" × 74" (231.1cm × 132.1cm × 187.9cm)
Note: Shown as reel diameter × width × hub diameter
Crate Dimensions for APT® XP Sticks
422" Long x 19.50" wide x 15.50" height with a 7/16" OSB top.
124
APT® XP Flexible Pipework
