2025 UL Ordering Catalog - Flipbook - Page 12
2 HP SUBMERSIBLE TURBINE PUMPS
ORDERING INFORMATION
2 Hp Variable Speed Submersible Pump Ordering Guide
A typical model designation has up to five components to
define the pump being supplied as follows:
Model Length (A)
STP Horsepower
Model Length
Range
59" – 87"
VL1
2 Hp Variable Speed
90" – 151"
VL2
122" – 213"
VL3
XXX YYYYY Z - A - B
XXX = Basic Model Designation
STP = These standard variable speed and variable length models
are capable of up to 10% ethanol with gasoline
IST** = These variable speed and variable length models include
alcohol-gasoline compatibility (up to 85% ethanol, up to 20%
Biodiesel, or 100% Biodiesel)
ISTAP** = These variable speed and variable length models
include alcohol-gasoline compatibility (up to 85% ethanol, up to
20% Biodiesel, or 100% Biodiesel) and Advanced Protection
with powder-coated, e-coated, and stainless steel components
2 Hp Fixed Speed
2 Hp Fixed Speed
High Pressure
Model Length
Designation
63" – 92"
VL1
94" – 154"
VL2
126" – 218"
VL3
63" – 92"
VL1
94" – 155"
VL2
126" – 218"
VL3
YYYYY = Factory Installed Options
Model designations may include one or more of the
following characters:
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell® (flow enhancing, expanded PMA shell)
R* = Model R check valve (24 psi relief/22 psi reset for PLLD)
Z = Pump Motor Horsepower Rating
(B)
RISER
LENGTH
VS2 = 2 Hp variable speed
A = Model Length (see table)
VL1 = STP variable length range #1
VL2 = STP variable length range #2
VL3 = STP variable length range #3
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that
indicate the total length of the riser in inches. Riser pipes are
available from 7" to 60" in 1" increments (additional charge for
risers 31" or longer).
(A)
MODEL
LENGTH
Notes:
*If not otherwise specified, all models are supplied with standard model check
valve (40 psi relief / 35 psi reset for MLD, TS-LS300, and TS-LS500).
**If not otherwise specified, 2 Hp variable speed pump motor horsepower rating
is implied for IST models.
12
2 Hp Submersible Turbine Pumps
