2025 UL Ordering Catalog - Flipbook - Page 11
SPECIFICATIONS
General
Only available in variable lengths
Check valve
2¾" fluorocarbon seal constructed with cast aluminum body and steel backing washer
Pressure relief valve
Available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi and resets above 35 psi
Syphon
Venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately
Air eliminator
Every submersible includes a tank return path with one-way check valve to provide active air elimination
Electrical disconnect
Electrical yoke for positive contractor disconnect during service
Approvals/Certifications
−
−
SUBMERSIBLE
PUMPING SYSTEMS
Variable speed models
cULus listed
Consult factory for applicable approvals
Pump Motor
4 Hp
Variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection
Max. pressure
Selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead
MagShell®
Available with MagShell® which results in 45% increased flow area around motor
Power Requirements
Variable speed pumps
Can only be controlled by a MagVFC™ variable frequency controller
VS4 models
Require three-phase incoming power supply to the MagVFC™ for proper operation
Power supply
Incoming power supply to the MagVFC™ can be 200-250 VAC, 50 or 60 Hz
Output
MagVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only
Max line draw
MagVFC™ max. line draw: 20 Amps
Max motor draw
15 Amps
Liquid Compatibility
Max. liquid viscosity
70 SSU at 60° F (15° C)
STP variable speed
STP variable speed models are UL listed for fuel mixtures containing up to 10% ethanol, and 20% MTBE, 20% ETBE or
17% TAME with gasoline
IST/ISTAP variable speed
IST/ISTAP variable speed models are UL and cUL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel,
100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline
Variable speed models
All variable speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state
Max line draw
MagVFC™ max. line draw: 20 Amps
Wetted elastomers
All wetted elastomers are made of a high grade, fluorocarbon compound
4 Hp Submersible Turbine Pumps
11
