2025 EN Catalog-Interactive - Flipbook - Page 65
WELDERS
The EF1 UPP® electrofusion unit from Franklin Electric works
with all UPP® electrofusion fittings and products. UPP®
welders feature state-of-the-art electronics which allow for a
more compact, user-friendly design.
PIPING &
CONTAINMENT
HIGHLIGHTS
SPECIFICATIONS
• The EF1 welder is IP65 rated and has been tested
CE Certified
around the world under exacting site conditions and
has proved to be an easy-to-use, efficient and
invaluable addition to the tool box. Its robust
construction, dust proof features and enhanced
graphic feed-back of the electrofusion progress offer
real benefit to the operator.
• The unit’s improved self-diagnostic capabilities also
ensure increased reliability and tolerance in a variety
of climatic conditions. It comes complete with welding
leads in a lightweight carry bag for the 230 V and a
robust case for the 110 V.
Supplied Cables
Colour Dia
Length
Primary cable–standard
Red
4 mm
5.5 m
Secondary containment cable
Green
2 mm
5.5 m
Bridging cable
(for multiple welds)
Red
4 mm
5.5 m
Fusion chamber cable
White
2.3 mm 5.5 m
Power supply cable
4 m (13')
Welding Unit Specifications
• The EF1 unit automatically recognizes the fitting when
connected with the correct welding cable. It also
checks the ambient temperature using a sensor
positioned in the housing and adjusts the energy level
to balance with the local environment. It then applies
the correct amount of energy for a successful weld.
Welding Unit Specifications
UPP® stock
code number
EF1-230 V
EF1-110 V
Operating voltage
230 V (+/-15%)
110 V (+/-15%)
Operating frequency
40 to 70 Hz
Operating temperature -15° to 45° C (5° F to 113° F)
Shipping dimensions
460 mm x
210 mm x
210 mm
420 mm x
340 mm x
80 mm
Shipping weight
3.6 kg
13.24 kg
ORDER INFORMATION
Cables & Transformer
Model
Description
Colour
EF1-110V
EF1 welder Set 110 V
Orange
EF1-230V
EF1 welder Set 230 V
Orange
EF1-PC 4MM
Welding cable–primary 4 amp, 4 mm pins red
Orange / Red
EF1-SC 2MM
Welding cable–secondary 5 amp, 2 mm pins green
Green
EF1-C7A
Welding cable–chamber 7 amp, 4 mm pins white
White
EF1-PC 2MM
Welding cable–primary 2 mm Red
Orange / Red
EF1-BC 4MM
Bridging cable–primary 4 amp, 4 mm pins red
Orange / Red
EW/BC/SC
Welding cable–secondary for E3, E4 & E7 welders only green
Green
EW1/C
Welding cable–primary 2 mm for E3, E4 & E7 welders only red
Orange
This unit is designed to weld UPP® pipes and fittings only* and must not be used in conjunction with any other polyethylene pipework systems. The UPP® systems
welder uses a constant current welding system unlike other systems which use constant voltage. Non-UPP® fittings may not be fused correctly with a risk of
leakage. Information shown is accurate at the time of going to print. Franklin Electric reserves the right to change product specifications at any time.
65
