2025 EN Catalog-Interactive - Flipbook - Page 58
LARGE MOUTH
DISPENSER SUMP
The large mouth dispenser sump modular design provides
versatility and ease of installation. There are six polyethylene
bases in three lengths and two depths. These bases have
a large 22" wide by 24", 36" or 48" long openings, easing
the installation of entry boots and piping connections. The
ribbed riser can be cut down in 3" increments in the field to
achieve proper pipe slopes with respect to grade. A variety of
large mouth tops (LMTs) are available to match nearly every
dispenser model. The lids are corrosion-resistant painted steel
to which shear valves and dispenser frames are mounted.
HIGHLIGHTS
SPECIFICATIONS
• 22" wide by 24", 36" or 48" long opening on base gives
plenty of room for boot, fitting and monitor installation.
• Available in medium and deep burial depths to properly
maintain slope.
• The base widens to a spacious 26" where entry boots and
pipe connections are made.
• Height modifications are accomplished by trimming off the
base at the ribs.
• Stabiliser bar kits (SBKs) mount into welded strut channels
for shear valve mounting. One SBK is required for each
shear valve and must be purchased separately.
Model
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E (mm)
(LMM)
(LMD)
LMM-2010
520
254
610
711
711
-
LMM-2407
603
191
914
1016
711
-
LM(M/D)-2715
686
191
914
1016
711
1092
LM(M/D)-2811
724
191
914
1016
711
10921
LMM-2915
756
400
914
1016
711
-
LMM-2915-HLX
756
387
914
1016
711
N/A
LMM-3915-HLX 1010
387
1219
1321
711
1092
LM(M/D)-4111
1054
279
1219
1321
711
1092
LM(M/D)-4115
1054
400
1219
1321
711
1092
ORDER INFORMATION
Model
Description
LMM-2010
Medium/deep dispenser sump 20" x 10"
LMM-2407
Medium/deep dispenser sump 24" x 7.5"
LM(M/D)-2715
Medium /deep dispenser sump 27" x 15"
LM(M/D)-2811
Medium /deep dispenser sump 28" x 11"
LMM-2915
Medium/deep dispenser sump 29" x 15"
LMM2915-HLX
Medium dispenser sump for Wayne Helix 2000 or
Helix 4000
LMM-3915-HLX
Medium dispenser sump for Wayne Helix 5000
LM(M/D)-4111
Medium/deep dispenser sump 41" x 11"
LM(M/D)-4115
Medium/deep dispenser sump 41" x 15"
A
B
GROUND
LEVEL
DISPENSER
Model
Description
SBK-1
Stabiliser bar kit for 2407
SBK-2
Stabiliser bar kit for 2010
SBK-25
Stabiliser bar kit for 4111
SBK-3
Stabiliser bar kit for 2915 & 4115
Measures to outside edge of the stabiliser bar kit.
58
C
152.4 mm
558.8 mm
101.6 mm
CONCRETE
E
393.7 mm
660.4 mm
D
