2025 EN Catalog-Interactive - Flipbook - Page 44
UPP® 110 MM
DUCTING SYSTEM
With a thick and robust wall, the new duct is equally flexible
and can be welded to electrofusion entry seals and other
110 mm electrofusion fittings. The duct will provide a water
tight chase for pipes or electrical cables when fully welded.
This product is for use as an electrical duct or gravel guard
for fuel pipework.
HIGHLIGHTS
ORDER INFORMATION
The following in-house testing has been satisfactorily
carried out on the duct:
Model
Description
00-110-050-DUCT
110 mm flexible PE duct coil 50 m
02.110
UPP ® fusion coupler 110 mm
• Electrofusion trials.
• Cold temperature bending tests at -29° C.
• Ball impact test at -29° C.
• Pressure testing at 2 bar for 1 week.
• Drop test of coil from 2 m.
44
02.125(SC)
UPP ® fusion coupler 125 mm secondary
09.125.110(SC)
UPP ® reducer 125 x 110 mm secondary
10.125(SC)
UPP ® end cap 125 mm secondary
49-125-110
UPP ® terminating reducer 125 x 110 mm secondary
49-125-110-TP
UPP ® terminating reducer 125 x 110 mm sec with
test port
304-110-TP
UPP ® fusion entry seal with coupler 110 mm with
test port (no boot)
305-R-1
UPP ® 305–5" fusion ring extended spigot
ESI-CAP-012
Weld pin protection cap
