2025 EN Catalog-Interactive - Flipbook - Page 253
SPECIFICATIONS
Pump Motor Assembly
Pump Motor Assembly
• Materials: Stainless steel construction including impellers/
diffusers, inlet/outlet,
and outer
shell
Stainless
steel
construction
Variable Length Range (A)
•Materials
Pump type: All models
are 5.1"
(130 mm) outside diameter
including
impellers/diffusers,
centrifugal type pump
inlet/outlet, and outer shell
• Power cable: 23'(7 m) black polyethylene jacketed power
All models are 5.1" (130 mm) outside
cabletype
Pump
diameter centrifugal type pump.
• 50 Hz pump motor: Three-stage pump with 2" BSPT
female outlet
23'(7m) black polyethylene
Power cable
jacketed
power cable
• Motor rating: Continuous
operation
with motor cooling
Minimum 6" (152 mm)
Diameter Pump Access
Recommended
provided by product flow and protected from dry running.
Three-stage pump with 2" BSPT
50 Hz pump motor
female outlet
Submersible Turbine Pump Kit
Continuous operation with motor
•Motor
All stainless steel hardware and Viton® or EPDM seals
rating
cooling provided by product flow and
• Bypass relief valve cracking
30-40 psi (2.1-2.8
protectedpressure
from dryofrunning
bar) and 4 gpm (15 lpm) minimum flow at the discharge of
all models Submersible Turbine Pump Kit
(A)
• Non-return check valve
crackingsteel
pressure
of 3 psi
bar)
All stainless
hardware
and(0.2
Viton®
Materials
between product piping
and bypass
or EPDM
seals relief valve of
all models
relief are
valve
crackingfor use with
• Liquid compatibility:Bypass
All models
intended
Bypass
relief
valve
pressure
of
30-40
psi
(2.1-2.8 bar)
Diesel Exhaust Fluid (DEF). DEF is a non-flammable,
cracking
pressure
and
4
gpm
(15
lpm)
minimum
at
non-combustible liquid that has a specific gravityflow
of 1.09
the
discharge
of
all
models
at 68˚F (20˚C), and is made per ISO 22241-1
3" (76 mm)
Bottom clearance typical
Non-return
check
specifications
with 32.5% urea and distilled or deionized
3 psi (0.2 bar) between product piping
valve
cracking
water.
As defined by ISO 22241-1, DEF is the same as
and bypass relief valve of all models
®
pressure
AUS 32 (aqueous urea solution) and also commonly
®
known as AdBlue All models are intended for use with
Model Length Designation
71"–104"
VL1
(1,800 mm–2,640 mm)
104"–168"
VL2
(2,640 mm–4,265 mm)
DEF Pump Motor Performance
DEF-PMA150B (Single Phase) and DEF-PMA150C
(Three Phase)
40
35
30
Total Head in Meters
Liquid
compatibility
Diesel Exhaust Fluid (DEF). DEF is a
non-flammable, non-combustible
liquid that has a specific gravity of
1.09 at 68°F (20°C), and is made
per ISO 22241-1 specifications with
32.5% urea and distilled or deionized
water. As defined by ISO 22241-1,
DEF is the same as AUS 32® (aqueous
urea solution) and also commonly
known as AdBlue®
Model Length Range
25
20
15
10
5
0
0
50
100
150
200
250
300
SUBMERSIBLE
PUMPING SYSTEMS
Flow in Liters per Minute (lpm)
Note: Performance is based on pumping water (1.00 specific gravity).
Pressure is taken at the discharge outlet of the pump motor .
253
