2025 EN Catalog-Interactive - Flipbook - Page 251
PUMP MOTOR
ASSEMBLIES FOR
DEF/ADBLUE®
FE PETRO® brand diesel exhaust fluid pump motor
assemblies (PMAs) feature a stainless steel close-coupled
design powered by a field-proven Franklin Electric motor.
HIGHLIGHTS
• Stainless steel, encapsulated motor ensures longevity
and impermeability to DEF seepage.
• Heavy-duty shaft provides superior alignment and
resistance to stress.
SPECIFICATIONS
• Double mechanical shaft seals protect the oil-filled
bearing chamber from DEF seepage, assuring minimal
wear and proper bearing lubrication.
Materials
Stainless steel construction including
impellers/diffusers, inlet/outlet, outer shell
Pump type
All models are 5" (130 mm) outside
diameter centrifugal type pump
Power cable
23'(7 m) black polyethylene jacketed
plug in power cable
50 Hz
pump motor
Three-stage pump with 2" BSPT
female outlet
Motor rating
Continuous operation with motor cooling
provided by product flow and protected
from dry running
Bypass relief
valve
By pass relief valve with cracking
pressure of 30-40 psi (2.1-2.8 bar) and
4 gpm (15 lpm) minimum flow required at
the discharge of all models
Max. cracking
pressure
Non-return check valve with maximum
cracking pressure of 3 psi (0.2 bar)
required between product piping and
bypass relief valve of all models
Liquid
compatibility
All models are intended for use with Diesel
Exhaust Fluid (DEF). DEF is a
non-flammable, non combustible liquid
that has a specific gravity of 1.09 at
68° F, and is made per ISO 22241-1
specifications with 32.5% urea and
distilled or deionized water. As defined by
ISO 22241-1, DEF is the same as AUS 32
(aqueous urea solution)
• Stainless steel hydraulics provide superior performance
and efficiency.
• Multiple models available to meet global requirements
of voltage and frequency.
• All models are suitable for vertical installation where
the pump motor is suspended off the bottom of the tank
by the discharge piping.
ORDER INFORMATION
DEF - PMA YYY Z
• DEF = Pump Compatible with DEF
• PMA = Pump Motor Assembly
• YYY = Pump Motor Hp Rating
• 150 = 1½ Hp fixed speed (1.1 kW)
• Z = Motor Electrical Rating
• B = Single phase, 50 Hz, 210-250 VAC (rated 6.9 Amps,
requires 30 microfarad run/start capacitor rated 440 VAC)
• C = Three phase, 50 Hz, 380-415 VAC (rated 2.6 Amps)
Note: Three phase models require overload protection in motor starter. Single
phase models have thermal overload protection built into the motor.
Model
Description
403383953
DEF-PMA 150B: single phase, 50hz, 200-250 VAC, 1.5 Hp
403383963
DEF-PMA 150C: three phase, 50hz, 380-415 VAC, 1.5 Hp
SUBMERSIBLE
PUMPING SYSTEMS
50Hz DEF PMA
251
