2025 EN Catalog-Interactive - Flipbook - Page 244
ORDER INFORMATION
High Capacity Submersible Turbine Pump Model Designation System
A typical turbine model designation has up to five components to define
the pump being supplied as follows:
STP XXXXX Y - A - B
• STP = Basic Model Designation
Note: Standard models up to 10% ethanol capable.
• XXXXX = Factory Installed Options
• HCP model designations may include one or more of the following
(B)
RISER
LENGTH
characters in alphabetical order: AG = Alcohol-gasoline compatible (85%
ethanol capable).
Note: Standard models 0% to 10% ethanol capable
• F = Floating suction adapter (3" NPT male adapter)
• *R = Model R check valve (1.65 bar relief/1.51 bar reset for PLLD)
*Note: If not otherwise specified, all HCP models supplied with standard
model check valve (2.76 bar relief/2.41 bar reset for MLD, TS-LS300 and
TS-LS500).
(A)
MODEL
LENGTH
• Y = Pump Motor Horsepower/Electrical Rating
• 3C = 3 Hp, 380-415 VAC, 50 Hz three phase
• 5C = 5 Hp, 380-415 VAC, 50 Hz three phase
• A = Model Length
• Model length is expressed as three numeric characters that indicate
the length of the HCP from the turbine manifold bottom to the pump
motor inlet in inches, available from 1524 mm to 5080 mm
(additional charge for models 3353 mm and longer).
• B = Riser Pipe Length
• Riser pipe length is expressed as two numeric characters that
indicate the total length of the riser in inches. Riser pipes are
available from 152mm to 1524 mm in 76 mm increments (additional
charge and lead time for risers 686 mm or longer).
High Capacity Turbine Pumps
(available as fixed length models only)**
Factory Installed Options
Model
Description
Model
Description
STP3C*
6" STP three phase, 380-415 VAC, 50 Hz
F
STP5C*
6" STP three phase, 380-415 VAC, 50 Hz
Floating suction adapter, 3" male NPT (must be ordered with
STP)
*Please call customer service for lead time on this item.
R
Model R relief valve factory installed, for Veeder-Root® (*)
PLLD
1. STP models are listed for compatibility with fuel mixtures containing up to
10% ethanol with gasoline, up to 5% biodiesel with diesel fuels, 20% MTBE,
20% ETBE, or 17% TAME with gasoline.
Field Installed Options
Model
Description
401165930
Syphon system
STP-CBB3C
3 hp, 380-415 VAC, 50 Hz, three-phase motor starter,
240 VAC coil
5. For riser pipe lengths 686 mm to 1524 mm, additional charge applies.
Call Customer Services for lead times.
STP-CBB5C
5 hp, 380-415 VAC, 50 Hz, three-phase motor starter,
240 VAC coil
** Model length (A) defined as the dimension from turbine manifold bottom to
pump motor inlet. Model length (A) can be a minimum of 1524 mm to a
maximum of 5080 mm. Adder (p/n 401190911) applies if model length (A) is
3353 mm to 4318 mm or adder (p/n 401190914) applies if model length (A) is
4319 mm to 5080 mm (charges are for additional packaging STP). Call
Customer Services for lead times.
TPGC-380
Three-phase 380-415 VAC Guardian controller
2. All models are supplied with a standard check valve unless factory option "R"
is specified.
3. All above models require 380-415 VAC, three-phase, 50 Hz incoming power.
4. 6" riser pipe, if supplied locally, must be 6⅝" OD by 1/4" WT tubing.
6" STP Extractable
Less manifold, riser and PMA.
Model
Description
HCPEXT-XXX
6" fixed length extractable (XXX indicates model length,
minimum 1524 mm and maximum 5080 mm)***
*** Fixed Length adders apply for extractable model lengths 3353 mm to
5080 mm. Call Customer Services for lead times.
244
