2025 EN Catalog-Interactive - Flipbook - Page 226
3/4 hp Fixed Speed Turbine Performance Chart
(STP75C)
50
45
45
40
40
35
35
Total Head in Meters
Total Head in Meters
(STP75B)
50
30
25
20
30
25
20
15
15
10
10
5
5
0
0
0
50
100
150
200
250
300
350
0
4
50
100
Note: Performance based on pumping solvent (0.78 specific gravity). Pressure
is taken at the manifold discharge outlet. Fixed Speed 0.75 HP was powered by
Single-Phase, 50 Hz, 250 Volt incoming supply.
150
200
250
300
Note: Performance based on pumping solvent (0.78 specific gravity). Pressure
is taken at the manifold discharge outlet. Fixed Speed 0.75 HP was powered by
Three-Phase, 50 Hz, 415 Volt incoming supply.
ORDER INFORMATION
3/4 hp Fixed Speed STP Model Designation System
A typical turbine model designation has up to five components
to define the pump being supplied as follows:
STP XXXXX Y - A - B
• STP = Basic model designation
• XXXXX = Factory installed options
• STP model designations may include one or more of the
(B)
RISER
LENGTH
following characters in alphabetical order:
• AG = Alcohol-gasoline compatible (up to 85% ethanol,
up to 20% biodiesel, or 100% biodiesel).
Note: Standard models up to 10% ethanol capable.
• F = Floating suction adapter (1½" NPT female adapter)
• K = Intake filter screen (IFS, factory installed to PMA)
• *R = Model R check valve (1.65 bar relief/1.52 bar reset
(A)
MODEL
LENGTH
for PLLD)
*Note: If not otherwise specified, all STP models supplied with
standard model check valve (2.76 bar relief/2.41 bar reset for
MLD, TS-LS300 and TS-LS500).
• Y = Pump motor horsepower rating
• 75B = 3/4 hp fixed speed, single-phase
• 75C = 3/4hp fixed speed, three-phase
• A = Model Length**
• VL1 = Variable length range #1
• VL2 = Variable length range #2
• VL3 = Variable length range #3
Note: VL2 models fit 94% of all known installations.
• B = Riser pipe length
• Riser pipe length is expressed as two numeric
characters that indicate the total length of the
riser in inches. Riser pipes are available from
178 mm-1524 mm in 25.4 mm increments
(additional charge for risers 787 mm or longer).
226
350
Flow in Liters per Minute (LPM)
Flow in Liters per Minute (LPM)
Part
75B
75C
Model Length* Range
Model Length Range
Number
1499 mm—2241 mm
VL1
2286 mm—3848 mm
VL2
3099 mm—5441 mm
VL3
1480 mm—2222 mm
VL1
2267 mm—3829 mm
VL2
3080 mm—5422 mm
VL3
