2025 EN Catalog-Interactive - Flipbook - Page 225
3/4 HP FIXED SPEED,
50HZ SUBMERSIBLE
TURBINE PUMPS
Marketers concerned about fueling times, efficiency,
serviceability, reliability and overall quality find it an easy
choice to specify FE PETRO® brand submersible turbine
pumps (STPs). An STP has to be reliable, it has to be safe,
and it has to perform. That's why thousands of station
owners around the world have trusted FE PETRO® STPs and
the Franklin Electric motors that drive them to keep their
business flowing for over 30 years. With best-in-class flow
rates and backed by a long history of dependability
FE PETRO® STPs simply do their job without fail, delivering
fuel to customers day after day without a hitch.
HIGHLIGHTS
SPECIFICATIONS
• Active air elimination, which eliminates air through the
highest point in the pump head at all times when the
pump is running.
-
75B models require single-phase,
200-250 VAC, 50 Hz incoming power.
-
75B models incorporate a starting
and running capacitor, with internal
bleed resistor, rated 440 Volt,
15 microfarad.
-
SPGC-220 single-phase Guardian
controllers and STP-CBBS
single-phase control boxes are
available for 75B control.
-
75C models require three-phase,
380-415 VAC, 50 Hz incoming power.
-
TPGC-380 three-phase Guardian
controllers and STP-CBB three-phase
magnetic starters available for
75C control.
• Contractor electrical disconnect, which requires
loosening only one bolt, allowing motor wiring to be
disconnected without venting the dangerous tank
vapours into the sump when servicing.
• Manual pressure relief vent screw to divert product back
into tank during maintenance.
Power
Requirements
• The VL2 pump fits 94% of all known tank diameters and
tank bury depth combinations. The VL1 and VL3 are
available to handle installations shorter or longer than
this range.
• The STP uses the proven FE PETRO® line check valve.
At 70 mm in diameter, the line valve reduces pressure
loss at high flow rates resulting in faster fuelling times.
• The pump motor is 3⁄4 hp fixed speed, 2875 rpm,
multi-stage centrifugal type pump motor with integral,
automatic, thermal overload protection.
Liquid Compatibility
• Max. liquid viscosity: 70 SSU at 60° F (15° C).
• Standard models are listed for fuel mixtures containing up
to 10% ethanol with gasoline, and 20% MTBE, 20% ETBE,
or 17% TAME with gasoline.
Models
3/4 hp fixed speed models are available in
variable length and fixed length options
Syphon
Venturi-type syphon primer supplied with
every submersible. Syphon check valve
and secondary syphon sold separately
Approvals &
Certifications
-
Consult factory for
applicable approvals.
-
ISO 9001 Certified Manufacturer
SUBMERSIBLE
PUMPING SYSTEMS
• STPAG models are compatible with fuel mixtures
containing diesel fuel with up to 20% biodiesel, 100%
biodiesel, up to 85% ethanol with gasoline, and 20%
MTBE, 20% ETBE, or 17% TAME with gasoline.
• 3⁄4 hp fixed speed models can also be used for fuel
mixtures containing up to 5% biodiesel with diesel fuels,
fuel oils, kerosene, Avgas and jet fuels in a non-gelled,
pourable state.
• All wetted elastomers are made of a high grade,
fluorocarbon compound.
225
