2025 EN Catalog-Interactive - Flipbook - Page 219
ORDER INFORMATION
2 hp Fixed Speed Submersible Turbine Pump Model Designation System
A typical turbine model designation has up to five components to define the pump being supplied as follows:
STP XXXXX Y - A - B
• STP = Basic model designation
• XXXXX = Factory installed options
• STP model designations may include one or more of the
following characters in alphabetical order:
• AG = Alcohol-gasoline compatible (up to 85% ethanol,
up to 20% biodiesel, or 100% biodiesel).
Note: Standard models up to 10% ethanol capable.
• F = Floating suction adapter (1½" NPT female adapter)
• H = High pressure (3.1 bar deadhead (no flow) output)
• K = Intake filter screen (IFS, factory installed to PMA)
• M = MagShell® (flow enhancing, expanded PMA shell)
• *R = Model R check valve (1.65 bar relief/1.52 bar reset
(B)
RISER
LENGTH
for PLLD)
*Note: If not otherwise specified, all STP models supplied with
standard model check valve (2.76 bar relief/2.41 bar reset for
MLD, TS-LS300 & TS-LS500).
• Y = Pump motor horsepower rating
• 200B = 2 hp fixed speed, 50 hz, 1-phase
• 200C = 2 hp fixed speed, 50 hz, 3-phase
• A = Model length
• VL1 = Variable length range #1
• VL2 = Variable length range #2
• VL3 = Variable length range #3
(A)
MODEL
LENGTH
Note: VL2 models fit 94% of all known installations.
• B = Riser pipe length
• Riser pipe length is expressed as two numeric
characters that indicate the total length of the riser in
inches. Riser pipes are available from 178 mm to
1524 mm in 25.4 mm increments (additional charge for
risers 787 mm or longer).
Model Length (A)
Part
200B
200C
Model Length* Range
Model Length Range Number
1632 mm—2374 mm
VL1
2420 mm—3981 mm
VL2
3233 mm—5575 mm
VL3
1575 mm—2317 mm
VL1
2363 mm—3924 mm
VL2
3175 mm—5518 mm
VL3
2 hp Fixed Speed Submersible Turbine Pumps
Description
Model Length Range Number
Model Length* Range
STP200B-VL1
2 hp fixed speed, single-phase
VL1
1632 mm—2374 mm
STP200B-VL2
2 hp fixed speed, single-phase
VL2
2420 mm—3981 mm
STP200B-VL3
2 hp fixed speed, single-phase
VL3
3233 mm—5575 mm
STP200C-VL1
2 hp fixed speed, three-phase
VL1
1575 mm—2317 mm
STP200C-VL2
2 hp fixed speed, three-phase
VL2
2363 mm—924 mm
STP200C-VL3
2 hp fixed speed, three-phase
VL3
3175 mm—5518 mm
SUBMERSIBLE
PUMPING SYSTEMS
Model
219
