2025 EN Catalog-Interactive - Flipbook - Page 113
FLOAT
KITS
Chemical Floats
LPG Floats
2" and 4" Floats
HIGHLIGHTS (2" AND 4" FLOATS)
HIGHLIGHTS (CHEMICAL FLOATS)
• Designed for applications involving 2", 3" or 4" riser pipes.
• Each float set contains a product and water float.
• Compatible with a wide variety of petroleum products.
• Water floats are coloured red for gasoline and blue for diesel
• Suitable for use in a wide variety of chemical applications,
to assure compatibility with most liquids.
• Constructed of nitrile rubber and PVDF. Water floats contain
either stainless steel or nickle plated brass ballast.
• Designed for applications involving tank openings of at least 2".
• Single float used for monitoring the level of LPG (propane) fuel.
• Suitable for monitoring pressurized products.
• For use in USTs or ASTs with TSP-LL2 or TSP-LL2-I probes.
• TSP-LPG/EU float can be used with locally supplied tank
isolation sleeves.
• #316 stainless steel product float with 2-1/16" OD.
• Use one float per probe.
• Float can be used with compatible liquids that have a specific
gravity greater than 0.64.
• Collapse pressure 500 psi/g minimum.
Model
Description
TSP-IDF2
2" float set for diesel tanks
TSP-IGF2
2" float set for gasoline tanks
TSP-IDF4
4" float set for diesel tanks
TSP-IGF4
4" float set for gasoline tanks
TSP-LPGF
2" float for LPG tanks, with or without
isolation sleeve
TSP-SSP
2-1/16" OD, #316 stainless steel float for chemical
applications only
FUEL MANAGEMENT
SYSTEMS
HIGHLIGHTS (LPG FLOATS)
consult factory for chemical compatibility issues.
Note: Order one float set for each FFS Mag probe.
PHASE SEPARATION FLOAT KITS
The water and phase separation detection float kit allows you to effectively
manage product levels as well as alert you of water or phase separation levels
in your tanks. A single float is used to detect the presence of both water or
phase separated fuel to ensure the prevention of either from reaching
customer’s vehicles.
HIGHLIGHTS
• Available in 2" and 4" float kit options.
• Optional float kit for gasoline and ethanol blend users.
• Product float determines fuel level.
• Water float will rise with the presence of water or phase
separated fuel.
• Simple single-float solution for both water and
phase separation.
• Free software upgrade available for T5 Series fuel
SPECIFICATIONS
Designed for Applications using 2" or 4" risers
Each float kit contains both product float
Kit contains
and water and phase separation float
Appropriate for use with gaso line and
Compatibility Ethanol blends up to E15
Compatible with all FFS probes
Options available for EVO TM 200, EVOTM
Available for 400, EVOTM 550, EVOTM 5000, EVO™ 600,
EVO™ 6000.
management systems and Colibri automatic tank gauges.
• Allows you to easily shut down a submersible pump before
ORDERING INFORMATION
water or phase separation reaches the customer’s vehicle.
Model
Description
TSP-IGF2P
2" phase separation float kit for gasoline and up to E15
TSP-IGF4P
4" phase separation float kit for gasoline and up to E15
113
