2025 EN Catalog-Interactive - Flipbook - Page 105
HYDROSTATIC INTERSTITIAL SENSOR (HIS)
The HIS detects leaks in double wall tanks where the interstitial
space is filled with a liquid brine solution. The polyester, Nitrile,
and epoxy construction is compatible with all types of brine.
HIGHLIGHTS
• Versatile sensor for virtually all fiberglass double wall
tanks equipped for hydrostatic leak detection.
• Microcomputer monitors liquid at varying levels within
tanks and relays digitally encoded status information
via the fail-safe sensor digital communication
system to an EVO™, alerting of any alarm conditions.
• For installation, lower the HIS to the bottom of the brine
reservoir of double wall tank. The normal brine level should
reside half way up the sensor. Sensors include the TSP-KV4
vented 4" riser cap.
*One TSP-KV4 is already included with each HIS or HIS-XL sensor.
Model
Description
FMP-HIS-U
Hydrostatic interstitial sensor, 11"
(EVO™ 200/400, EVO™ 600/6000)
FMP-HIS-XL-U
Hydrostatic interstitial sensor, 21"
(EVO™ 200/400, EVO™ 600/6000)
FMP-HIS
Hydrostatic interstitial sensor, 11"*
(EVO™ 550/5000, EVO™ 600/6000)
FMP-HIS-XL
Hydrostatic interstitial sensor, 21"*
(EVO™ 550/5000, EVO™ 600/6000)
TSP-KV4*
Hydrostatic sensor vented riser pipe cap kit for
4" riser pipes
FUEL MANAGEMENT
SYSTEMS
Note: The FMP-HIS-U/ FMP-HIS-XL-U communicates with EVO™ 600/6000
using the Universal Device Protocol Module (FMP-UDP9) or Probe Module
(TS-PRB). The FMP-HIS/ FMP-HIS-XL communicates with the EVO™ 550/5000
and EVO™ 600/6000 using the 3-Wire Sensor Module (TS-3WSNS).
ORDERING INFORMATION
CORROSION CONTROL™
DESICCANT PACK
SENSOR (DPS)
As part of the Corrosion Control™ System, the Desiccant Pack
Sensor provides remote monitoring of the remaining life of the
Desiccant Pack via an EVO™ for efficient maintenance. The
Desiccant Pack absorbs humidity from the sump environment
before it turns into corrosion-causing moisture.
HIGHLIGHTS
• The Desiccant Pack Sensor provides the percent of
remaining life of the Desiccant Pack.
• The Desiccant Pack Sensor hangers allow for multiple
mounting options and can accommodate 1, 2, or 4
Desiccant Packs.
ORDERING INFORMATION
• EVO™ Series compatibility:
• EVO™ 200/400
Model
Description
• EVO™ 600/6000
FMP-DPS-U
Desiccant Pack Sensor with single and
multi-pack hanger and installation kit
407750906
Corrosion Control™ Desiccant Pack, includes (6)
packs and (6) cable ties
• EVO™ data displayed:
• Desiccant % remaining.
• Sensor status (Ok, Desiccant Near Saturation,
Desiccant Saturated - Service Needed, Desiccant
Missing, Desiccant Sensor Overload).
• Trend (Active Drying - Desiccant is actively absorbing
water from environment or Passive Drying - Desiccant is
holding required humidity level).
105
