2025 EN Catalog-Interactive - Flipbook - Page 103
UNIVERSAL HYDROSTATIC
SENSOR (UHS)
The UHS uses float switch technology to continuously monitor
liquid-filled double wall containment sumps and tanks.
Normally submerged, the single float UHS will provide an
indication if there is a loss of monitoring liquid.
ORDERING INFORMATION
• Highly reliable float technology and closed output circuit
ensures that leaks are detected.
Model
Description
FMP-UHS
Universal hydrostatic sensor (all EVO™ Series)
• Chemical-resistant materials.
TSP-UHS
Universal hydrostatic sensor (for use with S940 only)
• The sensor can be installed into the reservoir of a liquid
filled double wall containment sump. The sensor must
be installed in a vertical position at a level where it is
normally submerged.
HM-KIT
Hydrostatic monitoring installation kit.
Includes: flexible brine tube, sensor housing clamp,
sensor housing, sensor cap, and hardware
• The UHS sensor will alert if the liquid level drops below
the bottom of the sensor.
FUEL MANAGEMENT
SYSTEMS
HIGHLIGHTS
Note: The FMP-UHS communicates with EVO™ 600/6000 using the Universal
Device Protocol Module (FMP-UDP9). The FMP-UHS also communicates with
the EVO™ 550/5000 and EVO™ 600/6000 using the 2-Wire Sensor Module
(TS-2WSNS) or the 3-Wire Sensor Module (TS-3WSNS).
ELECTRO-OPTIC
INTERSTITIAL SENSOR (EIS)
Utilizing electro-optic technology and made of chemically resistant
polysulfone plastic, the EIS may be installed in sumps, double wall tanks, or
other locations where the presence of liquid indicates a leak has occurred.
HIGHLIGHTS
ORDERING INFORMATION
• Highly accurate electro-optic technology and closed
output circuit ensures that leaks are detected.
Model
Description
FMP-EIS-U
Electro-optic interstitial sensor
(EVO™ 200/400, EVO™ 600/6000)
• Can be installed in fiberglass or steel double wall tanks.
FMP-EIS
Electro-optic interstitial sensor
(EVO™ 550/5000, EVO™ 600/6000)
• Utilizes light-emitting diodes and prisms to indicate if a
leak has occurred.
TSP-KI2
Interstitial sensor riser cap kit for 2" riser pipes
TSP-KW4
Interstitial sensor riser cap kit for 4" riser pipes
• Chemical-resistant materials.
• For fiberglass tanks, the EIS is pulled into the interstitial
space using a "fish" string or wire. For steel interstitial
tanks, the EIS is lowered directly to the bottom of the
interstitial space through a 2" NPT fitting provided for that
purpose on the tank. Optional installation kits are available
which include a riser cap and other parts required to
complete installation.
Note: The FMP-EIS-U communicates with EVO™ 600/ 6000 using the Universal
Device Protocol Module (FMP-UDP9) or Probe Module (TS-PRB). The FMP-EIS
communicates with the EVO™ 600/6000, EVO™ 550/5000 using the 3-Wire
Sensor Module (TS-3WSNS).
103
