2025 EN Catalog-Interactive - Flipbook - Page 102
DISCRIMINATING
MAGNETOSTRICTIVE
SENSOR (DMS)
The DMS sensor is a fast-acting, discriminating sensor that
utilizes magnetostrictive position measurement technology to
provide reliable monitoring of dispenser pans and containment
sumps. Utilizing one float to measure water level and one float
to measure product level, the DMS allows for the system to
have programmable water and product alarm points. The DMS
also has anti-tamper capability that notifies the system if the
sensor is moved from its installed position.
HIGHLIGHTS
ORDERING INFORMATION
• Utilizes proven magnetostrictive technology.
Model
Description
TSP-DMS-12
Discriminating magnetostrictive sensor,
monitors 12" (305 mm) of liquid & measures
22" (559 mm) in length (all EVO™ Series)
TSP-DMS-24
Discriminating magnetostrictive sensor,
monitors 24" (610 mm) of liquid & measures
34" (864 mm) in length (all EVO™ Series).
TSP-KS
Unistrut™ mounting kit
• Water warning, water alarm, and product alarm.
• Tamper protection feature will alarm if sensor is moved
from installed position.
• Alarms and recovers quickly when liquids are present.
Note: The TSP-DMS communicates with the EVO™ 550/5000 and EVO™ 600/6000
using the Probe Module (TS-PRB).
UNIVERSAL LIQUID
SENSOR (ULS)
Based on float-switch technology and made of chemically
resistant materials, the ULS is a low-cost sensor that can be
installed in sumps, dispenser pans, steel double wall tanks or
other locations where the presence of liquid indicates a leak
has occurred.
HIGHLIGHTS
ORDERING INFORMATION
• Highly reliable float technology and closed output
circuit ensures that leaks are detected.
Model
Description
FMP-ULS
Universal liquid sump sensor (all EVO™ Series)
• Chemical-resistant materials assure compatibility with
most liquids.
TSP-ULS
Universal liquid sump sensor
(for use with S940 only)
TSP-KI2
Interstitial sensor riser cap kit for 2" (51 mm)
riser pipes
• 1⁄2" NPT thread is provided on the compression gland fitting
attached to the sensor’s cable, allowing it to be suspended
from standard electrical boxes and fittings. The sensor may
be positioned vertically by adjusting cable length.
• For steel interstitial tanks, ULS is lowered into the opening
provided on the tank and is suspended by optional TSP-KI2
installation kit. Other mounting methods available
depending upon application and location.
102
Note: The FMP-ULS communicates with EVO™ 600/6000 using the Universal
Device Protocol Module (FMP-UDP9). The FMP-ULS also communicates with
the EVO™ 550/5000 and EVO™ 600/6000 using the 2-Wire Sensor Module
(TS-2WSNS) or the 3-Wire Sensor Module (TS-3WSNS).
